Grok 4.7Auteur : Wësche

3D-printable J-hook for a load test, written as OpenSCAD

A comparison of J-hook designs from Grok 4.7, Claude Opus 5.5 and GPT-6 Astra, each an OpenSCAD file exported to STL for a PLA strength test.

Claude Code + Three.js (code seul)Wandy 2
Vrais modèles · 360°Les deux à partir de la même photo : à gauche — une seule exécution non retouchée de Claude Code (Opus 5.5) qui le modélise en code Three.js ; à droite — Wandy 2.

Créez des modèles 3D détaillés

Le code seul ne donne que des formes simples. Wandy 2 transforme une seule photo en modèle 3D texturé, utilisable dans la même scène.

Prompt Grok 4.7

Design one 3D-printable J-hook for a strength test.
The hook hangs from an 8 mm steel bar. An 8 mm pin sits in the bill and we hang weight from that pin. I want the highest breaking load I can get without the bar or the pin slipping out.
Rules:
- One printed part. No screws, inserts, glue, or extra pieces.
- Must clip onto the bar and the pin by hand. No closed rings.
- Pin seats 40 mm apart, center to center.
- PLA. Max 35 g as printed.
- Must fit 80 x 60 x 25 mm.
- The pin should have to lift at least 10 mm to come out. If it can roll out the side, that design is invalid.
Give me:
1. A short explanation of the shape.
2. A complete OpenSCAD file I can compile and export to STL for Bambu Studio.
No STL text. No G-code. OpenSCAD only. If the first idea would slip off, replace it in the same answer.

Comment utiliser ce prompt

  1. Paste the prompt into Grok 4.7, or another model to compare, and ask for the OpenSCAD file only.

  2. Change the bar and pin diameter, spacing, weight limit, material and build volume to match your hardware.

  3. Compile in OpenSCAD, export STL, slice and print, then compare breaking loads and ask for revisions.

Par Wandy3D

Besoin d’un vrai modèle 3D dans votre scène ?

Votre agent construit avec des primitives. L’API Wandy3D transforme une photo ou un prompt en GLB texturé en quelques minutes, payé depuis un solde prépayé, sans abonnement.

  • Wandy 20,18 $US par modèle
  • Wandy 10,09 $US par modèle

Le solde n’expire jamais · les tâches échouées sont remboursées · les modèles créés via l’API sont à vous, téléchargeables dans tous les formats.

curl -s -X POST https://api.wandy3d.com/generate/cloud/ultra \  -H "Authorization: Bearer $WANDY3D_API_KEY" -F "file=@photo.jpg"# → {"task_id": "…"} — poll until "status" is "done":curl -s https://api.wandy3d.com/task/$TASK_ID/status \  -H "Authorization: Bearer $WANDY3D_API_KEY"# → {"model_id": "…"} — then GET /model/$MODEL_ID/export?format=glb

Publication d’origineVous êtes l’auteur ? Demandez-nous de modifier ou de retirer cette page