Robot body designed in CAD: servo base, wiring and layered shell

GPT-6 Astra was asked to design itself a body and produced a CAD assembly: a servo base plate with cabling under a curved layered shell.

Claude Code + Three.js (hanya kode)Wandy 2
Model asli · 360°Keduanya dari foto yang sama: kiri — satu kali jalankan Claude Code (Opus 5.5) tanpa diedit, memodelkannya dengan kode Three.js; kanan — Wandy 2.

Buat model 3D yang detail

Kode saja hanya menghasilkan bentuk sederhana. Wandy 2 mengubah satu foto menjadi model 3D bertekstur yang bisa Anda pakai di adegan yang sama.

Panduan build dari Wandy3D

Penulis tidak membagikan prompt-nya, jadi kami menuliskan cara membuat ulang karya ini.

Build a CAD model of a small robot body that a model designs for itself. Start from a flat dark circular base plate with an extended arm section. Mount two servo-style actuator pillars on it, one near the centre and one at the end of the arm, and add a small control board plus routed cables. Above the central pillar, create a curved, layered shell made of stacked cream and tan panels that sweep upward like a fin. Use parametric parts in a CAD tool so dimensions can be edited, and keep components as separate named bodies. Deliver the CAD file, exported meshes and a short rotating preview. Done means the assembly reads clearly as a mechanical body, with no overlapping parts and visible wiring.

Cara memakai prompt ini

  1. Paste the build brief into GPT-6 Astra in an agent that can run CAD scripts, and ask for parametric parts.

  2. Change the purpose, number of actuators, base size or shell shape to design your own robot body.

  3. Open the CAD file, check clearances and wiring, then ask for fixes and an exported mesh.

Dari Wandy3D

Butuh model 3D sungguhan di adegan Anda?

Agen Anda membangun dengan bentuk primitif. API Wandy3D mengubah foto atau prompt menjadi GLB bertekstur dalam beberapa menit — dibayar dari saldo prabayar, tanpa langganan.

  • Wandy 2US$0,18 per model
  • Wandy 1US$0,09 per model

Saldo tidak pernah kedaluwarsa · tugas yang gagal dikembalikan · model yang dibuat lewat API milik Anda dan bisa diunduh dalam semua format.

curl -s -X POST https://api.wandy3d.com/generate/cloud/ultra \  -H "Authorization: Bearer $WANDY3D_API_KEY" -F "file=@photo.jpg"# → {"task_id": "…"} — poll until "status" is "done":curl -s https://api.wandy3d.com/task/$TASK_ID/status \  -H "Authorization: Bearer $WANDY3D_API_KEY"# → {"model_id": "…"} — then GET /model/$MODEL_ID/export?format=glb

Postingan asliAnda penulisnya? Minta kami mengedit atau menghapus halaman ini