Interactive 3D H145-style helicopter with liveries and hover mode
A comparison of Grok 4.7 and GPT-6 Astra on one prompt. Astra's Three.js helicopter adds fine hardware detail, three liveries and a hover mode.
Detaylı 3D modeller oluştur
Sadece kodla basit şekiller elde edersin. Wandy 2, tek bir fotoğrafı aynı sahnede kullanabileceğin dokulu bir 3D modele dönüştürür.
GPT-6 Astra promptu
Create a detailed, interactive 3D scene of a modern helicopter in a single HTML file using Three.js and WebGL. Build genuine 3D geometry that can be viewed from every angle, not an image. Visual style: A premium aviation design presentation with a light gray studio background, a circular display platform, soft shadows, and realistic reflections. Helicopter: A smooth, streamlined fuselage inspired by light twin-engine helicopters such as the H145. A white body with a dark navy underside and blue accent stripe. Curved, tinted cockpit windows with reflections and carefully fitted window seals. Side doors, handles, panel seams, rivets, boarding steps, and antennas. Two engine housings with air intakes, ventilation grilles, and exhaust outlets. A five-bladed main rotor with a detailed hub, attachment hardware, and pitch-control linkages. A tapered tail boom, stabilizers, and a shrouded tail rotor with a genuine opening through its housing. Curved landing skids attached to the fuselage with structural supports. Navigation lights and a blinking beacon. All components must connect physically. Avoid floating parts, gaps between sections, rotor blades intersecting the fuselage, or windows hovering above the body. Interactions: Mouse drag to orbit, scroll to zoom, and touch controls. Start and stop both rotors with gradual acceleration and deceleration. Adjustable rotor speed. Hover mode: smoothly lift off the platform, gently sway in the air, and land softly when disabled. Automatic camera orbit. Front, side, and tail camera presets. Reset camera and fullscreen controls. Three liveries: glacier blue and white, rescue orange, and graphite. Interface: Top left: a small “AERONAUT / OBJECT STUDIES” label and a large “Horizon 05.” heading. Right side: a compact panel with specifications, helicopter status, livery selection, and rotor speed. Bottom: controls and interaction hints. Restrained typography, thin borders, and generous whitespace. Keep the helicopter unobstructed. All interface text in English. Technical requirements: Generate the geometry procedurally without downloading a prebuilt helicopter model. Use PBR materials, a studio reflection environment, and soft shadows. Make animation independent of frame rate. Reuse geometry and materials where appropriate, and cap pixel ratio for performance. Support desktop and mobile layouts, keeping the full rotor span visible in the initial view. If possible, embed dependencies in the HTML so the file works offline. Display a helpful fallback message if WebGL is unavailable. Before finishing, inspect the model from every side, test every control, and check for console errors. Pay particular attention to the silhouette, structural connections, glazing, and rotor mechanisms. Deliver the working HTML file, not just an explanation.
Bu prompt nasıl kullanılır
Paste the prompt into GPT-6 Astra in your coding tool and ask for one HTML file with Three.js.
Swap the aircraft, livery colours, heading text or camera presets to suit your own presentation.
Open it, spin the model, test rotors and hover, then ask for fixes to joints, glazing or controls.
Wandy3D'den
Sahnende gerçek bir 3D model mi lazım?
Ajanın sahneyi primitiflerle kuruyor. Wandy3D API'si bir fotoğrafı ya da promptu birkaç dakikada dokulu bir GLB'ye dönüştürür. Ödeme ön ödemeli bakiyeden yapılır, abonelik yok.
- Wandy 2Model başına $0,18
- Wandy 1Model başına $0,09
Bakiyenin süresi dolmaz · başarısız işlerin ücreti iade edilir · API ile yapılan modeller senindir, her formatta indirebilirsin.
curl -s -X POST https://api.wandy3d.com/generate/cloud/ultra \ -H "Authorization: Bearer $WANDY3D_API_KEY" -F "file=@photo.jpg"# → {"task_id": "…"} — poll until "status" is "done":curl -s https://api.wandy3d.com/task/$TASK_ID/status \ -H "Authorization: Bearer $WANDY3D_API_KEY"# → {"model_id": "…"} — then GET /model/$MODEL_ID/export?format=glbOrijinal gönderiYazarı sen misin? Bu sayfayı düzenlememizi ya da kaldırmamızı iste
Buna benzer promptlar
Tüm promptlara göz at
Kimi K3.1Interactive 3D helicopter with takeoff, assembly and exploded views
Lumina
Claude Opus 5.5Rubber band watermelon test: a squeezable, bursting 3D browser toy
林悦己Cheer
Claude Opus 5.5Interactive 3D volcano cutaway simulation with magma chamber
Konstantin Saifoulline
Claude Opus 5.5WebGPU jelly press toy: gummy fruit squashed and burst by a hydraulic press
Vib3Coded
Claude Opus 5.5Single-file WebGPU jelly press toy with soft-body fruit gummies
Vib3Coded
Claude Opus 5.5Scroll-driven exploding mechanical watch in raw WebGPU, single HTML file
Paruchh

