Grok 4.7Tác giả Wësche

3D-printable J-hook for a load test, written as OpenSCAD

A comparison of J-hook designs from Grok 4.7, Claude Opus 5.5 and GPT-6 Astra, each an OpenSCAD file exported to STL for a PLA strength test.

Claude Code + Three.js (chỉ code)Wandy 2
Mô hình thật · 360°Cả hai đều từ cùng một ảnh: bên trái — một lần chạy Claude Code (Opus 5.5) không chỉnh sửa, dựng vật thể bằng code Three.js; bên phải — Wandy 2.

Tạo mô hình 3D chi tiết

Chỉ dùng code thì chỉ được các hình khối đơn giản. Wandy 2 biến một tấm ảnh thành mô hình 3D có texture để bạn dùng ngay trong cùng cảnh đó.

Prompt cho Grok 4.7

Design one 3D-printable J-hook for a strength test.
The hook hangs from an 8 mm steel bar. An 8 mm pin sits in the bill and we hang weight from that pin. I want the highest breaking load I can get without the bar or the pin slipping out.
Rules:
- One printed part. No screws, inserts, glue, or extra pieces.
- Must clip onto the bar and the pin by hand. No closed rings.
- Pin seats 40 mm apart, center to center.
- PLA. Max 35 g as printed.
- Must fit 80 x 60 x 25 mm.
- The pin should have to lift at least 10 mm to come out. If it can roll out the side, that design is invalid.
Give me:
1. A short explanation of the shape.
2. A complete OpenSCAD file I can compile and export to STL for Bambu Studio.
No STL text. No G-code. OpenSCAD only. If the first idea would slip off, replace it in the same answer.

Cách dùng prompt này

  1. Paste the prompt into Grok 4.7, or another model to compare, and ask for the OpenSCAD file only.

  2. Change the bar and pin diameter, spacing, weight limit, material and build volume to match your hardware.

  3. Compile in OpenSCAD, export STL, slice and print, then compare breaking loads and ask for revisions.

Từ Wandy3D

Cần một mô hình 3D thật trong cảnh của bạn?

Agent của bạn dựng cảnh bằng các khối cơ bản. API Wandy3D biến ảnh hoặc prompt thành tệp GLB có texture chỉ trong vài phút — trả từ số dư nạp trước, không cần đăng ký gói.

  • Wandy 20,18 US$ mỗi mô hình
  • Wandy 10,09 US$ mỗi mô hình

Số dư không bao giờ hết hạn · tác vụ lỗi được hoàn tiền · mô hình tạo qua API thuộc về bạn và tải xuống được ở mọi định dạng.

curl -s -X POST https://api.wandy3d.com/generate/cloud/ultra \  -H "Authorization: Bearer $WANDY3D_API_KEY" -F "file=@photo.jpg"# → {"task_id": "…"} — poll until "status" is "done":curl -s https://api.wandy3d.com/task/$TASK_ID/status \  -H "Authorization: Bearer $WANDY3D_API_KEY"# → {"model_id": "…"} — then GET /model/$MODEL_ID/export?format=glb

Bài đăng gốcBạn là tác giả? Yêu cầu chúng tôi sửa hoặc gỡ trang này