3D-printable J-hook for a load test, written as OpenSCAD
A comparison of J-hook designs from Grok 4.7, Claude Opus 5.5 and GPT-6 Astra, each an OpenSCAD file exported to STL for a PLA strength test.
Detaillierte 3D-Modelle erstellen
Mit Code allein bekommst du einfache Formen. Wandy 2 macht aus einem Foto ein texturiertes 3D-Modell, das du in derselben Szene nutzen kannst.
Prompt für Grok 4.7
Design one 3D-printable J-hook for a strength test. The hook hangs from an 8 mm steel bar. An 8 mm pin sits in the bill and we hang weight from that pin. I want the highest breaking load I can get without the bar or the pin slipping out. Rules: - One printed part. No screws, inserts, glue, or extra pieces. - Must clip onto the bar and the pin by hand. No closed rings. - Pin seats 40 mm apart, center to center. - PLA. Max 35 g as printed. - Must fit 80 x 60 x 25 mm. - The pin should have to lift at least 10 mm to come out. If it can roll out the side, that design is invalid. Give me: 1. A short explanation of the shape. 2. A complete OpenSCAD file I can compile and export to STL for Bambu Studio. No STL text. No G-code. OpenSCAD only. If the first idea would slip off, replace it in the same answer.
So nutzt du diesen Prompt
Paste the prompt into Grok 4.7, or another model to compare, and ask for the OpenSCAD file only.
Change the bar and pin diameter, spacing, weight limit, material and build volume to match your hardware.
Compile in OpenSCAD, export STL, slice and print, then compare breaking loads and ask for revisions.
Von Wandy3D
Brauchst du ein echtes 3D-Modell in deiner Szene?
Dein Agent baut mit Primitiven. Die Wandy3D API macht aus einem Foto oder Prompt in wenigen Minuten ein texturiertes GLB – bezahlt aus einem Prepaid-Guthaben, ohne Abo.
- Wandy 20,18 $ pro Modell
- Wandy 10,09 $ pro Modell
Das Guthaben verfällt nie · fehlgeschlagene Jobs werden erstattet · über die API erstellte Modelle gehören dir und lassen sich in jedem Format herunterladen.
curl -s -X POST https://api.wandy3d.com/generate/cloud/ultra \ -H "Authorization: Bearer $WANDY3D_API_KEY" -F "file=@photo.jpg"# → {"task_id": "…"} — poll until "status" is "done":curl -s https://api.wandy3d.com/task/$TASK_ID/status \ -H "Authorization: Bearer $WANDY3D_API_KEY"# → {"model_id": "…"} — then GET /model/$MODEL_ID/export?format=glbOriginalbeitragBist du der Autor? Bitte uns, diese Seite zu ändern oder zu entfernen
Ähnliche Prompts
Alle Prompts ansehen
Claude Sonnet 5.5Macro-style 3D human eye in Three.js with lashes and a lid that follows the iris
Simonas
Claude Opus 5.5LEGO Ford Model T with a 155-step animated build manual
Alex Lieberman
GPT-6 AstraFluffy guinea pig modeled in Blender from a single short request
かよこ
Claude Fable 5.1VRChat avatar dress modeled in Blender, shown dancing in Unity
のわ〜る👼🍆🐄
Claude Opus 5.5Eiffel Tower in Three.js: four models, one prompt
Pascual ⚡
GPT-6 LunaVoxel robot mascot on a floating island in Three.js
Arsh - 16 y/o builder

