Single-file WebGPU jelly press toy with soft-body fruit gummies

Claude Opus 5.5 produced a WebGPU toy where a hydraulic press crushes gummy fruit slices that burst into pieces you can grab and throw.

Claude Code + Three.js (nur Code)Wandy 2
Echte Modelle · 360°Beide aus demselben Foto: links — ein unbearbeiteter Lauf von Claude Code (Opus 5.5), der es in Three.js-Code modelliert; rechts — Wandy 2.

Detaillierte 3D-Modelle erstellen

Mit Code allein bekommst du einfache Formen. Wandy 2 macht aus einem Foto ein texturiertes 3D-Modell, das du in derselben Szene nutzen kannst.

Prompt für Claude Opus 5.5

Create "Jelly Press": a single-file interactive 3D toy in HTML (all JS, CSS and WGSL shaders inline, no external assets except Google Fonts). Render with WebGPU; if WebGPU or an adapter is missing, show a clean fallback message instead of a blank page.

CONCEPT
Four translucent gummy jellies shaped like fruit slices sit one at a time on the steel bed of a hydraulic press. The player holds a big red button to lower the press. The jelly squashes and spreads, the pressure gauge climbs, and somewhere past half its height it bursts into pieces. After the burst the game does NOT end: the player can grab the pieces, drag them, throw them around, and squash them again.

THE JELLIES (chips at the bottom, keys 1–4)
1. Watermelon wedge (half-disc slab): red flesh with dark teardrop seeds, a pale rind band, a green striped skin.
2. Orange slice (half-disc): orange pulp segments separated by thin white membranes, pale pith, orange peel.
3. Fig half: pink flesh full of small golden seeds, a cream layer, a dark purple skin.
4. Pineapple ring: golden fibrous flesh with radial streaks and a hole in the middle.
Each jelly should look like real gummy candy: subsurface scattering, soft translucency, glossy specular highlights, soft shadows on a warm studio floor (cream/beige, tone-mapped).

PHYSICS (CPU, fixed 60 Hz step)
- XPBD tetrahedral soft body with 8 substeps: co-rotational per-tet shape matching, per-tet volume constraints, hard edge strain limits (0.35×–1.8×), edge velocity damping, floor contact with Coulomb friction, rolling resistance, and gentle settling when nearly still.
- Render mesh skinned on the CPU through barycentric embedding in the tets; normals recomputed from triangles every frame.
- The press die is a kinematic round platen (radius ~1.05, rounded edge, a thickness, a ram above it). It acts as a ceiling with friction below, a shelf on top, and a side wall at its rim. The two press posts are solid.
- Pressure readout in bar comes from the platen's contact load, scaled per fruit.

THE BURST
- Break at a random squash between 52% and 66% of the jelly's height.
- Plan the fracture in the background shortly after each round starts, so the burst itself is instant.
- 5–7 big pieces from 3D Voronoi cells with slightly tilted walls. On 3–4 of them, a far corner is chipped off by two cutting planes and split further into 2–4 small chips, which leaves jagged, notched edges.
- Assign tets to cells by centroid. Duplicate particles per chunk. Merge tiny islands into their neighbours.
- The new body adopts the old positions and velocities.
- Clip the skin triangles against each cell's half-spaces, and fill every cut face with a clean flat cap showing the fruit's interior (flesh, seeds, membranes). No stretched triangles, no holes.
- Kick pieces outward and upward from the press. Small chips fly faster and higher and tumble with random spin.
- Show a big italic verdict for about 2.5 s, then fade it: "Splat." (melon), "Squeezed." (orange), "Well, that's jam." (fig), "Crushed." (pineapple). Include a stat line: "Gave up at N bar and N% of its height."

AFTER THE BURST: PLAY MODE
- Picking: ray/triangle test against the skinned mesh, with a forgiving screen-space fallback for touch.
- Grabbing pins the grabbed patch (radius ~0.4, only particles of that chunk) to a target on a camera-facing drag plane. Small chips move whole; big pieces stretch and swing like jelly.
- Releasing throws the piece with the pointer's velocity.
- Pieces collide with each other. A particle found inside another chunk's tet is pushed out through that chunk's nearest skin face, with friction. Use a chunk AABB broad phase and a spatial hash of skin tets.
- Pieces stay on stage: side walls, plus an invisible front edge so nothing ends up under the controls or behind the camera.
- The press still works: hold to squash the pieces again (no second fracture); Raise lifts the platen.
- Wet "plop" sounds on landings; a small squelch on grab.
- Cursor: open hand over pieces, closed hand while dragging. Dragging empty space orbits the camera.

UI (editorial, minimal)
- Masthead top-left: "JELLY PRESS" in bold condensed caps, with "PRESS" filled in yellow/black hazard stripes. Subtitle: "Four gummies. One hydraulic press."
- Top-right: Reset and Sound toggle.
- Bottom deck:
  - Caption line with escalating captions while pressing: "Contact." → "It's fine. It's jelly." → "Getting wider." → "That's a pancake now." → "It's making a noise." → "Please."
  - Circular pressure dial (0–400 bar arc, red zone) around a red HOLD button, a Raise button, and a big numeric bar readout.
  - Fruit chips with icons.
- In play mode the caption slot shows "Grab a piece. Throw it." with small "Press again" and "Next jelly" buttons.
- Controls: hold Space or ArrowDown to press, ArrowUp to raise, R to reset, 1–4 to pick a fruit. Wheel zooms; double-click resets the view.
- Camera: low bench-level view; the press frame yaws per fruit so the posts never block the jelly. Framing adapts so the jelly sits between masthead and deck; works on phones (portrait) with a narrower stage.

SOUND (procedural Web Audio, no files)
Hydraulic motor hum that rises with pressure, wet squelches, occasional creaks at high pressure, a valve clunk when the platen stops, a loud burst, soft plops on landing. Unlock on first interaction.

QUALITY BAR
- Smooth 60 fps on a laptop.
- Background warm-up of the other fruits' meshes and shaders so switching is instant.
- Respect prefers-reduced-motion.
- Accessible labels, a gauge with role=meter, focus-visible outlines.
- No console errors. The page never goes blank.

So nutzt du diesen Prompt

  1. Paste the prompt into Claude Opus 5.5 in your coding tool and ask for one self-contained HTML file; open it in a WebGPU browser.

  2. Swap the fruits, verdict lines, palette or burst range to make the toy your own.

  3. You get a playable press with gauge, sound and throwable pieces; iterate on physics, camera or the phone layout.

Von Wandy3D

Brauchst du ein echtes 3D-Modell in deiner Szene?

Dein Agent baut mit Primitiven. Die Wandy3D API macht aus einem Foto oder Prompt in wenigen Minuten ein texturiertes GLB – bezahlt aus einem Prepaid-Guthaben, ohne Abo.

  • Wandy 20,18 $ pro Modell
  • Wandy 10,09 $ pro Modell

Das Guthaben verfällt nie · fehlgeschlagene Jobs werden erstattet · über die API erstellte Modelle gehören dir und lassen sich in jedem Format herunterladen.

curl -s -X POST https://api.wandy3d.com/generate/cloud/ultra \  -H "Authorization: Bearer $WANDY3D_API_KEY" -F "file=@photo.jpg"# → {"task_id": "…"} — poll until "status" is "done":curl -s https://api.wandy3d.com/task/$TASK_ID/status \  -H "Authorization: Bearer $WANDY3D_API_KEY"# → {"model_id": "…"} — then GET /model/$MODEL_ID/export?format=glb

OriginalbeitragBist du der Autor? Bitte uns, diese Seite zu ändern oder zu entfernen