Grok 4.7Autor: Wësche

3D-printable J-hook for a load test, written as OpenSCAD

A comparison of J-hook designs from Grok 4.7, Claude Opus 5.5 and GPT-6 Astra, each an OpenSCAD file exported to STL for a PLA strength test.

Claude Code + Three.js (solo código)Wandy 2
Modelos reales · 360°Ambos a partir de la misma foto: a la izquierda, una ejecución sin editar de Claude Code (Opus 5.5) que lo modeló con código Three.js; a la derecha, Wandy 2.

Crea modelos 3D detallados

Solo con código obtienes formas simples. Wandy 2 convierte una foto en un modelo 3D con texturas que puedes usar en la misma escena.

Prompt para Grok 4.7

Design one 3D-printable J-hook for a strength test.
The hook hangs from an 8 mm steel bar. An 8 mm pin sits in the bill and we hang weight from that pin. I want the highest breaking load I can get without the bar or the pin slipping out.
Rules:
- One printed part. No screws, inserts, glue, or extra pieces.
- Must clip onto the bar and the pin by hand. No closed rings.
- Pin seats 40 mm apart, center to center.
- PLA. Max 35 g as printed.
- Must fit 80 x 60 x 25 mm.
- The pin should have to lift at least 10 mm to come out. If it can roll out the side, that design is invalid.
Give me:
1. A short explanation of the shape.
2. A complete OpenSCAD file I can compile and export to STL for Bambu Studio.
No STL text. No G-code. OpenSCAD only. If the first idea would slip off, replace it in the same answer.

Cómo usar este prompt

  1. Paste the prompt into Grok 4.7, or another model to compare, and ask for the OpenSCAD file only.

  2. Change the bar and pin diameter, spacing, weight limit, material and build volume to match your hardware.

  3. Compile in OpenSCAD, export STL, slice and print, then compare breaking loads and ask for revisions.

De Wandy3D

¿Necesitas un modelo 3D de verdad en tu escena?

Tu agente construye con primitivas. La API de Wandy3D convierte una foto o un prompt en un GLB con texturas en pocos minutos, con pago desde un saldo prepago y sin suscripción.

  • Wandy 20,18 US$ por modelo
  • Wandy 10,09 US$ por modelo

El saldo nunca vence · los trabajos fallidos se reembolsan · los modelos creados con la API son tuyos y puedes descargarlos en todos los formatos.

curl -s -X POST https://api.wandy3d.com/generate/cloud/ultra \  -H "Authorization: Bearer $WANDY3D_API_KEY" -F "file=@photo.jpg"# → {"task_id": "…"} — poll until "status" is "done":curl -s https://api.wandy3d.com/task/$TASK_ID/status \  -H "Authorization: Bearer $WANDY3D_API_KEY"# → {"model_id": "…"} — then GET /model/$MODEL_ID/export?format=glb

Publicación original¿Eres el autor? Pídenos editar o eliminar esta página