Grok 4.7작성자 Wësche

3D-printable J-hook for a load test, written as OpenSCAD

A comparison of J-hook designs from Grok 4.7, Claude Opus 5.5 and GPT-6 Astra, each an OpenSCAD file exported to STL for a PLA strength test.

Claude Code + Three.js (코드만)Wandy 2
실제 모델 · 360°둘 다 같은 사진으로 만들었어요. 왼쪽은 Claude Code(Opus 5.5)가 Three.js 코드로 모델링한 편집 없는 1회 실행 결과, 오른쪽은 Wandy 2로 만든 결과예요.

디테일한 3D 모델 만들기

코드만으로는 단순한 도형밖에 만들 수 없어요. Wandy 2는 사진 한 장을 같은 장면에 바로 쓸 수 있는 텍스처 3D 모델로 바꿔 줘요.

Grok 4.7 프롬프트

Design one 3D-printable J-hook for a strength test.
The hook hangs from an 8 mm steel bar. An 8 mm pin sits in the bill and we hang weight from that pin. I want the highest breaking load I can get without the bar or the pin slipping out.
Rules:
- One printed part. No screws, inserts, glue, or extra pieces.
- Must clip onto the bar and the pin by hand. No closed rings.
- Pin seats 40 mm apart, center to center.
- PLA. Max 35 g as printed.
- Must fit 80 x 60 x 25 mm.
- The pin should have to lift at least 10 mm to come out. If it can roll out the side, that design is invalid.
Give me:
1. A short explanation of the shape.
2. A complete OpenSCAD file I can compile and export to STL for Bambu Studio.
No STL text. No G-code. OpenSCAD only. If the first idea would slip off, replace it in the same answer.

프롬프트 사용 방법

  1. Paste the prompt into Grok 4.7, or another model to compare, and ask for the OpenSCAD file only.

  2. Change the bar and pin diameter, spacing, weight limit, material and build volume to match your hardware.

  3. Compile in OpenSCAD, export STL, slice and print, then compare breaking loads and ask for revisions.

Wandy3D 제공

장면에 진짜 3D 모델이 필요하신가요?

에이전트는 기본 도형으로 장면을 만들어요. Wandy3D API는 사진이나 프롬프트를 몇 분 만에 텍스처가 입혀진 GLB로 바꿔 줘요. 구독 없이 선불 잔액에서 결제돼요.

  • Wandy 2모델당 US$0.18
  • Wandy 1모델당 US$0.09

잔액은 만료되지 않아요 · 실패한 작업은 환불돼요 · API로 만든 모델은 회원님 소유이며 모든 형식으로 다운로드할 수 있어요.

curl -s -X POST https://api.wandy3d.com/generate/cloud/ultra \  -H "Authorization: Bearer $WANDY3D_API_KEY" -F "file=@photo.jpg"# → {"task_id": "…"} — poll until "status" is "done":curl -s https://api.wandy3d.com/task/$TASK_ID/status \  -H "Authorization: Bearer $WANDY3D_API_KEY"# → {"model_id": "…"} — then GET /model/$MODEL_ID/export?format=glb

원본 게시물작성자이신가요? 이 페이지의 수정이나 삭제를 요청하세요