Hillside villa with pool and sea view built in Blender, two-model comparison

Claude Fable 5.1 and GPT-6 Astra were given the same task: a Blender villa with pool and interiors. Compare their fly-throughs side by side.

Claude Code + Three.js (코드만)Wandy 2
실제 모델 · 360°둘 다 같은 사진으로 만들었어요. 왼쪽은 Claude Code(Opus 5.5)가 Three.js 코드로 모델링한 편집 없는 1회 실행 결과, 오른쪽은 Wandy 2로 만든 결과예요.

디테일한 3D 모델 만들기

코드만으로는 단순한 도형밖에 만들 수 없어요. Wandy 2는 사진 한 장을 같은 장면에 바로 쓸 수 있는 텍스처 3D 모델로 바꿔 줘요.

Wandy3D 제작 브리프

작성자가 프롬프트를 공개하지 않아서, 이 작품을 재현하는 방법을 저희가 정리했어요.

Build a Blender scene of a modern two-storey villa on a forested hillside above the sea. Use a flat white roof, large glass walls, a timber deck, a long infinity-style pool with loungers and a few floating pool toys, and an open living room with sofas, a kitchen island and a bedroom facing the water. Surround it with palm trees, dense green vegetation, rocks and a sandy bay. Deliver a Blender Python script that creates the geometry, materials and lighting, plus a camera path of about 20 seconds: start with an aerial view of the house, glide over the pool and terrace, move through the living room, kitchen and bedroom, then pull back out to the full exterior. Use bright daylight and soft interior light. Done means the house reads clearly from outside and inside, and the animated camera moves smoothly. If possible, run the same brief with a second model and compare the two results side by side.

프롬프트 사용 방법

  1. Paste the build brief into your coding agent with Claude Fable 5.1 and let it write the Blender Python script.

  2. Change the architecture, location, furniture and camera path, or run the same brief on a second model.

  3. Render the fly-through, compare the two outputs, and ask for fixes to materials, lighting or camera timing.

Wandy3D 제공

장면에 진짜 3D 모델이 필요하신가요?

에이전트는 기본 도형으로 장면을 만들어요. Wandy3D API는 사진이나 프롬프트를 몇 분 만에 텍스처가 입혀진 GLB로 바꿔 줘요. 구독 없이 선불 잔액에서 결제돼요.

  • Wandy 2모델당 US$0.18
  • Wandy 1모델당 US$0.09

잔액은 만료되지 않아요 · 실패한 작업은 환불돼요 · API로 만든 모델은 회원님 소유이며 모든 형식으로 다운로드할 수 있어요.

curl -s -X POST https://api.wandy3d.com/generate/cloud/ultra \  -H "Authorization: Bearer $WANDY3D_API_KEY" -F "file=@photo.jpg"# → {"task_id": "…"} — poll until "status" is "done":curl -s https://api.wandy3d.com/task/$TASK_ID/status \  -H "Authorization: Bearer $WANDY3D_API_KEY"# → {"model_id": "…"} — then GET /model/$MODEL_ID/export?format=glb

원본 게시물작성자이신가요? 이 페이지의 수정이나 삭제를 요청하세요