GPT-6 Astra작성자 Vib3Coded

Interactive 3D H145-style helicopter with liveries and hover mode

A comparison of Grok 4.7 and GPT-6 Astra on one prompt. Astra's Three.js helicopter adds fine hardware detail, three liveries and a hover mode.

Claude Code + Three.js (코드만)Wandy 2
실제 모델 · 360°둘 다 같은 사진으로 만들었어요. 왼쪽은 Claude Code(Opus 5.5)가 Three.js 코드로 모델링한 편집 없는 1회 실행 결과, 오른쪽은 Wandy 2로 만든 결과예요.

디테일한 3D 모델 만들기

코드만으로는 단순한 도형밖에 만들 수 없어요. Wandy 2는 사진 한 장을 같은 장면에 바로 쓸 수 있는 텍스처 3D 모델로 바꿔 줘요.

GPT-6 Astra 프롬프트

Create a detailed, interactive 3D scene of a modern helicopter in a single HTML file using Three.js and WebGL. Build genuine 3D geometry that can be viewed from every angle, not an image.

Visual style:
A premium aviation design presentation with a light gray studio background, a circular display platform, soft shadows, and realistic reflections.
Helicopter:

A smooth, streamlined fuselage inspired by light twin-engine helicopters such as the H145.
A white body with a dark navy underside and blue accent stripe.
Curved, tinted cockpit windows with reflections and carefully fitted window seals.
Side doors, handles, panel seams, rivets, boarding steps, and antennas.
Two engine housings with air intakes, ventilation grilles, and exhaust outlets.
A five-bladed main rotor with a detailed hub, attachment hardware, and pitch-control linkages.
A tapered tail boom, stabilizers, and a shrouded tail rotor with a genuine opening through its housing.
Curved landing skids attached to the fuselage with structural supports.
Navigation lights and a blinking beacon.
All components must connect physically. Avoid floating parts, gaps between sections, rotor blades intersecting the fuselage, or windows hovering above the body.

Interactions:

Mouse drag to orbit, scroll to zoom, and touch controls.
Start and stop both rotors with gradual acceleration and deceleration.
Adjustable rotor speed.
Hover mode: smoothly lift off the platform, gently sway in the air, and land softly when disabled.
Automatic camera orbit.
Front, side, and tail camera presets.
Reset camera and fullscreen controls.
Three liveries: glacier blue and white, rescue orange, and graphite.
Interface:

Top left: a small “AERONAUT / OBJECT STUDIES” label and a large “Horizon 05.” heading.
Right side: a compact panel with specifications, helicopter status, livery selection, and rotor speed.
Bottom: controls and interaction hints.
Restrained typography, thin borders, and generous whitespace. Keep the helicopter unobstructed.
All interface text in English.
Technical requirements:

Generate the geometry procedurally without downloading a prebuilt helicopter model.
Use PBR materials, a studio reflection environment, and soft shadows.
Make animation independent of frame rate.
Reuse geometry and materials where appropriate, and cap pixel ratio for performance.
Support desktop and mobile layouts, keeping the full rotor span visible in the initial view.
If possible, embed dependencies in the HTML so the file works offline.
Display a helpful fallback message if WebGL is unavailable.
Before finishing, inspect the model from every side, test every control, and check for console errors. Pay particular attention to the silhouette, structural connections, glazing, and rotor mechanisms.

Deliver the working HTML file, not just an explanation.

프롬프트 사용 방법

  1. Paste the prompt into GPT-6 Astra in your coding tool and ask for one HTML file with Three.js.

  2. Swap the aircraft, livery colours, heading text or camera presets to suit your own presentation.

  3. Open it, spin the model, test rotors and hover, then ask for fixes to joints, glazing or controls.

Wandy3D 제공

장면에 진짜 3D 모델이 필요하신가요?

에이전트는 기본 도형으로 장면을 만들어요. Wandy3D API는 사진이나 프롬프트를 몇 분 만에 텍스처가 입혀진 GLB로 바꿔 줘요. 구독 없이 선불 잔액에서 결제돼요.

  • Wandy 2모델당 US$0.18
  • Wandy 1모델당 US$0.09

잔액은 만료되지 않아요 · 실패한 작업은 환불돼요 · API로 만든 모델은 회원님 소유이며 모든 형식으로 다운로드할 수 있어요.

curl -s -X POST https://api.wandy3d.com/generate/cloud/ultra \  -H "Authorization: Bearer $WANDY3D_API_KEY" -F "file=@photo.jpg"# → {"task_id": "…"} — poll until "status" is "done":curl -s https://api.wandy3d.com/task/$TASK_ID/status \  -H "Authorization: Bearer $WANDY3D_API_KEY"# → {"model_id": "…"} — then GET /model/$MODEL_ID/export?format=glb

원본 게시물작성자이신가요? 이 페이지의 수정이나 삭제를 요청하세요