Live 3D rocket factory with ten launch pads in Three.js

GPT-6 Astra produced a Three.js simulation of a rocket factory: materials arrive, rockets roll out to one of ten pads and lift off.

Claude Code + Three.js (코드만)Wandy 2
실제 모델 · 360°둘 다 같은 사진으로 만들었어요. 왼쪽은 Claude Code(Opus 5.5)가 Three.js 코드로 모델링한 편집 없는 1회 실행 결과, 오른쪽은 Wandy 2로 만든 결과예요.

디테일한 3D 모델 만들기

코드만으로는 단순한 도형밖에 만들 수 없어요. Wandy 2는 사진 한 장을 같은 장면에 바로 쓸 수 있는 텍스처 3D 모델로 바꿔 줘요.

Wandy3D 제작 브리프

작성자가 프롬프트를 공개하지 않아서, 이 작품을 재현하는 방법을 저희가 정리했어요.

Build a live 3D factory simulation in Three.js that runs in the browser. Model a rocket production site with a large assembly hall, an internal production line with stations, a road network, a river and landscaped terrain, plus ten launch pads with gantry towers laid out along a strip of land. Animate the full flow: raw materials arrive, rockets are assembled inside the hall, each finished rocket drives out on a transporter to a free pad, stands upright and lifts off with a short exhaust effect. Use a clean, light palette with white buildings, soft green ground and pale blue water. Add an orbit camera so the viewer can fly from an overview of all pads to a close look inside the hall, and a small HUD with a clock and speed control. Apply lean-production ideas such as a steady pull flow and minimal waiting. Deliver one self-contained HTML file. Done means rockets are produced, dispatched and launched continuously without manual input.

프롬프트 사용 방법

  1. Paste the build brief into GPT-6 Astra in your coding tool and ask for a single HTML file with Three.js.

  2. Swap the product, pad count or layout, for example cars to a loading dock or drones to a launch field.

  3. Open the file, orbit the camera through the hall, then ask for new stations, a speed slider or throughput stats.

Wandy3D 제공

장면에 진짜 3D 모델이 필요하신가요?

에이전트는 기본 도형으로 장면을 만들어요. Wandy3D API는 사진이나 프롬프트를 몇 분 만에 텍스처가 입혀진 GLB로 바꿔 줘요. 구독 없이 선불 잔액에서 결제돼요.

  • Wandy 2모델당 US$0.18
  • Wandy 1모델당 US$0.09

잔액은 만료되지 않아요 · 실패한 작업은 환불돼요 · API로 만든 모델은 회원님 소유이며 모든 형식으로 다운로드할 수 있어요.

curl -s -X POST https://api.wandy3d.com/generate/cloud/ultra \  -H "Authorization: Bearer $WANDY3D_API_KEY" -F "file=@photo.jpg"# → {"task_id": "…"} — poll until "status" is "done":curl -s https://api.wandy3d.com/task/$TASK_ID/status \  -H "Authorization: Bearer $WANDY3D_API_KEY"# → {"model_id": "…"} — then GET /model/$MODEL_ID/export?format=glb

원본 게시물작성자이신가요? 이 페이지의 수정이나 삭제를 요청하세요