Robot body designed in CAD: servo base, wiring and layered shell
GPT-6 Astra was asked to design itself a body and produced a CAD assembly: a servo base plate with cabling under a curved layered shell.
Detaylı 3D modeller oluştur
Sadece kodla basit şekiller elde edersin. Wandy 2, tek bir fotoğrafı aynı sahnede kullanabileceğin dokulu bir 3D modele dönüştürür.
Wandy3D'den yapım özeti
Yazar promptu paylaşmadı, bu yüzden bu çalışmayı nasıl yeniden yapabileceğini biz yazdık.
Build a CAD model of a small robot body that a model designs for itself. Start from a flat dark circular base plate with an extended arm section. Mount two servo-style actuator pillars on it, one near the centre and one at the end of the arm, and add a small control board plus routed cables. Above the central pillar, create a curved, layered shell made of stacked cream and tan panels that sweep upward like a fin. Use parametric parts in a CAD tool so dimensions can be edited, and keep components as separate named bodies. Deliver the CAD file, exported meshes and a short rotating preview. Done means the assembly reads clearly as a mechanical body, with no overlapping parts and visible wiring.
Bu prompt nasıl kullanılır
Paste the build brief into GPT-6 Astra in an agent that can run CAD scripts, and ask for parametric parts.
Change the purpose, number of actuators, base size or shell shape to design your own robot body.
Open the CAD file, check clearances and wiring, then ask for fixes and an exported mesh.
Wandy3D'den
Sahnende gerçek bir 3D model mi lazım?
Ajanın sahneyi primitiflerle kuruyor. Wandy3D API'si bir fotoğrafı ya da promptu birkaç dakikada dokulu bir GLB'ye dönüştürür. Ödeme ön ödemeli bakiyeden yapılır, abonelik yok.
- Wandy 2Model başına $0,18
- Wandy 1Model başına $0,09
Bakiyenin süresi dolmaz · başarısız işlerin ücreti iade edilir · API ile yapılan modeller senindir, her formatta indirebilirsin.
curl -s -X POST https://api.wandy3d.com/generate/cloud/ultra \ -H "Authorization: Bearer $WANDY3D_API_KEY" -F "file=@photo.jpg"# → {"task_id": "…"} — poll until "status" is "done":curl -s https://api.wandy3d.com/task/$TASK_ID/status \ -H "Authorization: Bearer $WANDY3D_API_KEY"# → {"model_id": "…"} — then GET /model/$MODEL_ID/export?format=glbOrijinal gönderiYazarı sen misin? Bu sayfayı düzenlememizi ya da kaldırmamızı iste
Buna benzer promptlar
Tüm promptlara göz at
Claude Sonnet 5.5Macro-style 3D human eye in Three.js with lashes and a lid that follows the iris
Simonas
Grok 4.73D-printable J-hook for a load test, written as OpenSCAD
Wësche
Claude Opus 5.5LEGO Ford Model T with a 155-step animated build manual
Alex Lieberman
GPT-6 AstraFluffy guinea pig modeled in Blender from a single short request
かよこ
Claude Fable 5.1VRChat avatar dress modeled in Blender, shown dancing in Unity
のわ〜る👼🍆🐄
Claude Opus 5.5Eiffel Tower in Three.js: four models, one prompt
Pascual ⚡

