Robot body designed in CAD: servo base, wiring and layered shell
GPT-6 Astra was asked to design itself a body and produced a CAD assembly: a servo base plate with cabling under a curved layered shell.
Tạo mô hình 3D chi tiết
Chỉ dùng code thì chỉ được các hình khối đơn giản. Wandy 2 biến một tấm ảnh thành mô hình 3D có texture để bạn dùng ngay trong cùng cảnh đó.
Hướng dẫn dựng từ Wandy3D
Tác giả không chia sẻ prompt, nên chúng tôi đã ghi lại cách tái tạo sản phẩm này.
Build a CAD model of a small robot body that a model designs for itself. Start from a flat dark circular base plate with an extended arm section. Mount two servo-style actuator pillars on it, one near the centre and one at the end of the arm, and add a small control board plus routed cables. Above the central pillar, create a curved, layered shell made of stacked cream and tan panels that sweep upward like a fin. Use parametric parts in a CAD tool so dimensions can be edited, and keep components as separate named bodies. Deliver the CAD file, exported meshes and a short rotating preview. Done means the assembly reads clearly as a mechanical body, with no overlapping parts and visible wiring.
Cách dùng prompt này
Paste the build brief into GPT-6 Astra in an agent that can run CAD scripts, and ask for parametric parts.
Change the purpose, number of actuators, base size or shell shape to design your own robot body.
Open the CAD file, check clearances and wiring, then ask for fixes and an exported mesh.
Từ Wandy3D
Cần một mô hình 3D thật trong cảnh của bạn?
Agent của bạn dựng cảnh bằng các khối cơ bản. API Wandy3D biến ảnh hoặc prompt thành tệp GLB có texture chỉ trong vài phút — trả từ số dư nạp trước, không cần đăng ký gói.
- Wandy 20,18 US$ mỗi mô hình
- Wandy 10,09 US$ mỗi mô hình
Số dư không bao giờ hết hạn · tác vụ lỗi được hoàn tiền · mô hình tạo qua API thuộc về bạn và tải xuống được ở mọi định dạng.
curl -s -X POST https://api.wandy3d.com/generate/cloud/ultra \ -H "Authorization: Bearer $WANDY3D_API_KEY" -F "file=@photo.jpg"# → {"task_id": "…"} — poll until "status" is "done":curl -s https://api.wandy3d.com/task/$TASK_ID/status \ -H "Authorization: Bearer $WANDY3D_API_KEY"# → {"model_id": "…"} — then GET /model/$MODEL_ID/export?format=glbBài đăng gốcBạn là tác giả? Yêu cầu chúng tôi sửa hoặc gỡ trang này
Prompt tương tự
Xem tất cả prompt
Claude Sonnet 5.5Macro-style 3D human eye in Three.js with lashes and a lid that follows the iris
Simonas
Grok 4.73D-printable J-hook for a load test, written as OpenSCAD
Wësche
Claude Opus 5.5LEGO Ford Model T with a 155-step animated build manual
Alex Lieberman
GPT-6 AstraFluffy guinea pig modeled in Blender from a single short request
かよこ
Claude Fable 5.1VRChat avatar dress modeled in Blender, shown dancing in Unity
のわ〜る👼🍆🐄
Claude Opus 5.5Eiffel Tower in Three.js: four models, one prompt
Pascual ⚡

