Robot body designed in CAD: servo base, wiring and layered shell
GPT-6 Astra was asked to design itself a body and produced a CAD assembly: a servo base plate with cabling under a curved layered shell.
Detaillierte 3D-Modelle erstellen
Mit Code allein bekommst du einfache Formen. Wandy 2 macht aus einem Foto ein texturiertes 3D-Modell, das du in derselben Szene nutzen kannst.
Build-Briefing von Wandy3D
Der Autor hat keinen Prompt geteilt, also haben wir aufgeschrieben, wie du diesen Build nachbauen kannst.
Build a CAD model of a small robot body that a model designs for itself. Start from a flat dark circular base plate with an extended arm section. Mount two servo-style actuator pillars on it, one near the centre and one at the end of the arm, and add a small control board plus routed cables. Above the central pillar, create a curved, layered shell made of stacked cream and tan panels that sweep upward like a fin. Use parametric parts in a CAD tool so dimensions can be edited, and keep components as separate named bodies. Deliver the CAD file, exported meshes and a short rotating preview. Done means the assembly reads clearly as a mechanical body, with no overlapping parts and visible wiring.
So nutzt du diesen Prompt
Paste the build brief into GPT-6 Astra in an agent that can run CAD scripts, and ask for parametric parts.
Change the purpose, number of actuators, base size or shell shape to design your own robot body.
Open the CAD file, check clearances and wiring, then ask for fixes and an exported mesh.
Von Wandy3D
Brauchst du ein echtes 3D-Modell in deiner Szene?
Dein Agent baut mit Primitiven. Die Wandy3D API macht aus einem Foto oder Prompt in wenigen Minuten ein texturiertes GLB – bezahlt aus einem Prepaid-Guthaben, ohne Abo.
- Wandy 20,18 $ pro Modell
- Wandy 10,09 $ pro Modell
Das Guthaben verfällt nie · fehlgeschlagene Jobs werden erstattet · über die API erstellte Modelle gehören dir und lassen sich in jedem Format herunterladen.
curl -s -X POST https://api.wandy3d.com/generate/cloud/ultra \ -H "Authorization: Bearer $WANDY3D_API_KEY" -F "file=@photo.jpg"# → {"task_id": "…"} — poll until "status" is "done":curl -s https://api.wandy3d.com/task/$TASK_ID/status \ -H "Authorization: Bearer $WANDY3D_API_KEY"# → {"model_id": "…"} — then GET /model/$MODEL_ID/export?format=glbOriginalbeitragBist du der Autor? Bitte uns, diese Seite zu ändern oder zu entfernen
Ähnliche Prompts
Alle Prompts ansehen
Claude Sonnet 5.5Macro-style 3D human eye in Three.js with lashes and a lid that follows the iris
Simonas
Grok 4.73D-printable J-hook for a load test, written as OpenSCAD
Wësche
Claude Opus 5.5LEGO Ford Model T with a 155-step animated build manual
Alex Lieberman
GPT-6 AstraFluffy guinea pig modeled in Blender from a single short request
かよこ
Claude Fable 5.1VRChat avatar dress modeled in Blender, shown dancing in Unity
のわ〜る👼🍆🐄
Claude Opus 5.5Eiffel Tower in Three.js: four models, one prompt
Pascual ⚡

