Classic starship modeled in CAD with a bridge and 28 moving parts

GPT-6 Astra designed a retro-style Enterprise starship in a CAD program, then rendered an orbit video of it above Earth. The model is built for 3D printing.

Claude Code + Three.js (코드만)Wandy 2
실제 모델 · 360°둘 다 같은 사진으로 만들었어요. 왼쪽은 Claude Code(Opus 5.5)가 Three.js 코드로 모델링한 편집 없는 1회 실행 결과, 오른쪽은 Wandy 2로 만든 결과예요.

디테일한 3D 모델 만들기

코드만으로는 단순한 도형밖에 만들 수 없어요. Wandy 2는 사진 한 장을 같은 장면에 바로 쓸 수 있는 텍스처 3D 모델로 바꿔 줘요.

Wandy3D 제작 브리프

작성자가 프롬프트를 공개하지 않아서, 이 작품을 재현하는 방법을 저희가 정리했어요.

Build a detailed CAD model of a classic 1960s-style starship with a saucer section, a secondary hull, a connecting neck and two long engine nacelles with glowing copper-orange ends. Give it a pale grey hull with panel lines, a registry number and name painted on the saucer and nacelle, and a thin red stripe along the hull. Design it as an assembly of separate parts, around 28 of them moving, including a captain's bridge and a few interior areas, and keep the geometry clean enough to be 3D printed. Then render a cinematic fly-around of the finished model: a slow orbit past the saucer, a side pass along the nacelles, and a top-down pull-back, all set in front of a blue planet and a starfield. Open with a title card and close with a end card. Deliver the CAD files plus the rendered video of about 30 seconds. Done means the proportions read as the iconic ship from every angle and the camera moves are smooth.

프롬프트 사용 방법

  1. Open a CAD-capable agent setup and give GPT-6 Astra the build brief for the starship, listing the parts you need.

  2. Swap the ship, the registry text, the part count or the interior areas for your own vehicle design.

  3. Export the CAD parts, ask Astra for a fly-around render, and refine proportions or print tolerances.

Wandy3D 제공

장면에 진짜 3D 모델이 필요하신가요?

에이전트는 기본 도형으로 장면을 만들어요. Wandy3D API는 사진이나 프롬프트를 몇 분 만에 텍스처가 입혀진 GLB로 바꿔 줘요. 구독 없이 선불 잔액에서 결제돼요.

  • Wandy 2모델당 US$0.18
  • Wandy 1모델당 US$0.09

잔액은 만료되지 않아요 · 실패한 작업은 환불돼요 · API로 만든 모델은 회원님 소유이며 모든 형식으로 다운로드할 수 있어요.

curl -s -X POST https://api.wandy3d.com/generate/cloud/ultra \  -H "Authorization: Bearer $WANDY3D_API_KEY" -F "file=@photo.jpg"# → {"task_id": "…"} — poll until "status" is "done":curl -s https://api.wandy3d.com/task/$TASK_ID/status \  -H "Authorization: Bearer $WANDY3D_API_KEY"# → {"model_id": "…"} — then GET /model/$MODEL_ID/export?format=glb

원본 게시물작성자이신가요? 이 페이지의 수정이나 삭제를 요청하세요