Robot body designed in CAD: servo base, wiring and layered shell

GPT-6 Astra was asked to design itself a body and produced a CAD assembly: a servo base plate with cabling under a curved layered shell.

Claude Code + Three.js (코드만)Wandy 2
실제 모델 · 360°둘 다 같은 사진으로 만들었어요. 왼쪽은 Claude Code(Opus 5.5)가 Three.js 코드로 모델링한 편집 없는 1회 실행 결과, 오른쪽은 Wandy 2로 만든 결과예요.

디테일한 3D 모델 만들기

코드만으로는 단순한 도형밖에 만들 수 없어요. Wandy 2는 사진 한 장을 같은 장면에 바로 쓸 수 있는 텍스처 3D 모델로 바꿔 줘요.

Wandy3D 제작 브리프

작성자가 프롬프트를 공개하지 않아서, 이 작품을 재현하는 방법을 저희가 정리했어요.

Build a CAD model of a small robot body that a model designs for itself. Start from a flat dark circular base plate with an extended arm section. Mount two servo-style actuator pillars on it, one near the centre and one at the end of the arm, and add a small control board plus routed cables. Above the central pillar, create a curved, layered shell made of stacked cream and tan panels that sweep upward like a fin. Use parametric parts in a CAD tool so dimensions can be edited, and keep components as separate named bodies. Deliver the CAD file, exported meshes and a short rotating preview. Done means the assembly reads clearly as a mechanical body, with no overlapping parts and visible wiring.

프롬프트 사용 방법

  1. Paste the build brief into GPT-6 Astra in an agent that can run CAD scripts, and ask for parametric parts.

  2. Change the purpose, number of actuators, base size or shell shape to design your own robot body.

  3. Open the CAD file, check clearances and wiring, then ask for fixes and an exported mesh.

Wandy3D 제공

장면에 진짜 3D 모델이 필요하신가요?

에이전트는 기본 도형으로 장면을 만들어요. Wandy3D API는 사진이나 프롬프트를 몇 분 만에 텍스처가 입혀진 GLB로 바꿔 줘요. 구독 없이 선불 잔액에서 결제돼요.

  • Wandy 2모델당 US$0.18
  • Wandy 1모델당 US$0.09

잔액은 만료되지 않아요 · 실패한 작업은 환불돼요 · API로 만든 모델은 회원님 소유이며 모든 형식으로 다운로드할 수 있어요.

curl -s -X POST https://api.wandy3d.com/generate/cloud/ultra \  -H "Authorization: Bearer $WANDY3D_API_KEY" -F "file=@photo.jpg"# → {"task_id": "…"} — poll until "status" is "done":curl -s https://api.wandy3d.com/task/$TASK_ID/status \  -H "Authorization: Bearer $WANDY3D_API_KEY"# → {"model_id": "…"} — then GET /model/$MODEL_ID/export?format=glb

원본 게시물작성자이신가요? 이 페이지의 수정이나 삭제를 요청하세요